AirPods Pro 3 sound worse on a Mac when the mic is on: what I measured on macOS 27
Yes, it still happens on AirPods Pro 3. On macOS 27.0.1, opening the AirPods mic dropped their sound from 48 kHz stereo to 24 kHz mono, and it stayed there for about 2 seconds after the mic closed. With the Mac's built-in mic recording instead, the AirPods stayed at 48 kHz stereo. The free fix: pick the Mac's mic in System Settings, Sound, Input, and in each call or dictation app that has its own mic menu. CallLane ($9 launch price (first 50 buyers), then $15) keeps the Mac's system input on that mic when macOS moves it back to the AirPods; it can't change an app that picks the AirPods mic by name.
Measured on AirPods Pro 3 (firmware 9A348) with a MacBook Pro on macOS 27.0.1, : the AirPods’ sample rate and channel count, one run per state. Not a listening test, and the codec isn’t identified. CallLane facts are from the CallLane 1.0.5 source.
CallLane keeps your music at full volume on calls and your AirPods in high quality. One-time purchase, 14-day refund.
Buy $9What I measured
macOS lists AirPods as two audio devices: the mic (an input) and the earbuds (an output). I read each one’s sample rate and channel count from Core Audio while recording 6 seconds from one mic or the other, with the AirPods as the Mac’s output the whole time and CallLane’s input lock off.
| What was happening | AirPods sound (output) | What the recording came out as |
|---|---|---|
| Nothing using a mic | 48 kHz, stereo | None |
| Recording from the AirPods mic | 24 kHz, mono | 24 kHz mono, real audio (not silence) |
| 2 seconds after that recording stopped | Still 24 kHz, mono | None |
| Recording from the MacBook Pro’s built-in mic | 48 kHz, stereo | 48 kHz mono |
In the one run where I timed it, the AirPods were back to 48 kHz stereo about 2.4 seconds after the mic closed. So a short dictation likely costs you about 2 more seconds of mono after you stop talking, though I opened the mic with a test recorder, not a dictation app.
What this doesn’t tell you: which Bluetooth codec carries the 24 kHz. Core Audio doesn’t name it. The rate matches the AAC-ELD that a 2022 reading of macOS’s logs found on older AirPods, but I can’t confirm that for Pro 3. It also says nothing about other AirPods models, other macOS versions or the iPhone.
Why the sound drops
AirPods have a listening mode (stereo, no mic) and a headset mode that carries the mic. They can’t do both, so any app that records from the AirPods mic switches them, and Apple says audio quality and volume drop until the mic is no longer in use. The Pro 3 didn’t change that. More on headset mode.
The free fix: Mac mic in, AirPods out
- Open System Settings, then Sound, then Input, and pick the Mac’s built-in mic (or a USB mic). Close System Settings afterwards; while the Input list is showing, it can hold the mic open.
- Leave Output on your AirPods.
- In each call or dictation app with its own mic menu, pick the same mic or System default. An app set to the AirPods by name ignores step 1. Zoom has it under Settings, Audio; Discord under User Settings, Voice & Video; Wispr Flow under Settings, General, Microphone.
The catch is that macOS makes the AirPods the input again each time they connect, so step 1 doesn’t stick. The full guide for calls covers that, and every app that puts the mic back, free and paid, is compared here.
How good is the AirPods Pro 3 mic itself?
The other half of the question is what the people on your call hear. On my MacBook Pro with macOS 27.0.1, the AirPods Pro 3 mic showed up as a 24 kHz mono device, and my recording from it came out at 24 kHz mono. A 24 kHz recording can’t hold sound above 12 kHz; the built-in mic’s 48 kHz recording can. That’s a ceiling, not a verdict. Background noise, distance from your mouth and the Mac’s voice processing change how you sound, and I measured rates, not how either mic sounds.
To judge it yourself, record the same sentence twice in QuickTime Player (File, New Audio Recording, then pick the mic from the menu next to the record button), once with each mic, and listen back on the AirPods afterwards.
Measure it yourself
No app needed. In Terminal, run system_profiler SPAudioDataType | grep -i -A8 airpods. It lists two entries with your AirPods’ name: the one with Input Channels is the mic, the one with Output Channels is the earbuds. Each shows a Current SampleRate. If you renamed your AirPods without the word “AirPods”, put their name in place of airpods.
- Run it with nothing using a mic. On my Pro 3 the output entry read 48000 with 2 output channels.
- Start a call or a dictation that uses the AirPods mic and run it again. When I opened the AirPods mic, the output entry read 24000 with 1 channel.
- Switch that app to the Mac’s mic, wait a few seconds and run it once more.
On my Mac this showed the same drop as my Core Audio reading. Both report the rate macOS set for the device, not an analysis of the sound.
Where CallLane fits
You don’t need CallLane for this; the free fix above is the fix. CallLane helps with the part macOS undoes. Its Lock input holds the Mac’s system input on the mic you chose: when macOS or an app changes it, CallLane switches it back as soon as macOS reports the change, and checks again every 2 seconds. Apps on their system default mic then record from the Mac’s mic, which in the table above kept the AirPods at 48 kHz stereo. I haven’t repeated the measurement with the lock on.
Its limits. It sets only the system default input, so an app that picks the AirPods mic by name is out of its reach; do step 3 for that app. macOS can also make the AirPods the input at the moment an app starts its mic. CallLane switches it back, but an app that grabs the mic in that instant can still get the AirPods, and they stay in mono until that recording ends, plus about 2 seconds. If another app keeps changing the input (Teams and Zoom can, at the start of a call), CallLane pauses for a few seconds instead of fighting it, and says so in its menu. CallLane also stops calls from turning your other audio down (call ducking), which the mic-only apps don’t do.
Questions
Did AirPods Pro 3 fix the sound drop when the mic is on?
No. On macOS 27.0.1 with firmware 9A348, opening the AirPods Pro 3 mic still dropped their sound from 48 kHz stereo to 24 kHz mono, for about 2 seconds after the mic closed too. Recording from the Mac's built-in mic kept them at 48 kHz stereo.
Is the AirPods Pro 3 mic good for calls on a Mac?
On my MacBook Pro with macOS 27.0.1 it recorded at 24 kHz mono, and using it dropped the AirPods' own sound to 24 kHz mono as well. I measured the rates, not how a voice sounds; record a test clip with each mic in QuickTime Player to compare.
How do I check my AirPods' sample rate on a Mac?
Run system_profiler SPAudioDataType in Terminal. Each AirPods entry shows a Current SampleRate. On AirPods Pro 3 the output entry read 48000 with 2 channels when no app used the mic, and 24000 with 1 channel while the AirPods mic was in use.